Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System
Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System

Strike Industries ASM & ASM Ring Cap Multi-Optic Mount System

Regular price €199,45
/

 

National Tactical Officers Association Approved
NTOA Overall Rating: 4.07

The Strike Industries Adjustable Scope Mount (ASM) combines different eye relief options into one scope mount. The ASM can be set to one of four (4) Standard, Extended, Intermediate Extended and Hyper Extended positions. The ASM is CNC machined from 7250 aluminum and hard anodized in black. 7250 aluminum excels in applications requiring lightweight and high strength. Intended for use with Picatinny rail section rifles. The versatility of the Strike Industries Adjustable Scope Mount allows users to adjust the scope away from the shooter and also closer to the shooter when mounted in reverse for a hunting rifle setups, creating flexibility for various eye relief and scope positions.

Package Contents:
-x1 Base
-x2 Clamps
-x2 Scope Rings
-x2 M5 x 27mm
-x3 M4 x 5 mm
-x8 M3 x 10 mm
-x1 4mm Allen Key
-x1 3mm Allen Key
-x1 2.5mm Allen Key
-x2 Scope Ring Reducer Pairs
-x1 Cantilever
-x1 Loctite blue threadlocker

Product Features:
-30mm scope mount with optional ring reducers for (25.4mm/1 inch) scopes
-Various eye relief positions available
-7250 aluminum excels in applications requiring lightweight and high strength
-CNC machined
-Reverse mount for a closer eye relief in hunting rifle setups
-Four (4) positions: Standard, Extended, Intermediate Extended and Hyper Extended

COMPATIBILITY: 30mm Tube

The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

Package Contents:
-x1 Strike ASM Ring Cap Mount
-x1 Strike Multi-Optic Sight Mount
-x1 Picatinny rail mount
-x4 Screw for ring cap to ASM mount [M3x8mm M2.5 Socket Cap]
-x2 Screw for optic plate to ASM ring cap [M4x8mm T25 Flat]
-x2 Screw for Picatinny rail [M4x7mm T25 Socket Cap]
-x2 Screw [M3x6mm T10 Flat]
-x2 Screw [M3x6mm T10 Rounded]
-x2 Screw [M3x8mm T10 Flat]
-x2 Screw [M3x8mm T10 Rounded]
-x2 Screw [M3x10mm T10 Flat]
-x2 Screw [M3x10.5mm T10 Flat]
-x2 Screw [M3x14mm T10 Flat]
-x2 Screw [M3x15mm T10 Flat]
-x3 Large mounting post
-x5 Small mounting post
-x1 Hex tool [2.5mm]
-x1 Torx tool [T10]
-x1 Torx tool [T25]
-x1 Loctite® Threadlocker Blue 243®
-x1 Warning card

Product Features:
-Only for use with 30mm tube Strike Adjustable Scope Mount (ASM)
-Optic plate or Picatinny rail can be mounted at 2, 10 or 12 o’clock positions
-Included optic plate is compatible with all major micro red dot sights on the market
-Included Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessory
-Lightweight and high-strength
-Machined from 6061-T6 aluminum

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

 

 

ADJUSTABLE SCOPE MOUNT (ASM):
-SCOPE TUBE SIZE: 30mm or 1 inch
-CLEARANCE BETWEEN RINGS: 70.18mm
-CENTER OF TUBE ABOVE RAIL: 36.68mm
-LENGTH: 143mm
-WIDTH: 45mm
-HEIGHT: 63mm
-WEIGHT: 7.6 oz

STRIKE ASM RING CAP MOUNT:
-LENGTH: 44.82mm (1.77")
-WIDTH: 18.83mm (0.74")
-HEIGHT: 20.6mm (0.81")
-WEIGHT: 0.52 oz

STRIKE MULTI-OPTIC SIGHT MOUNT:
-LENGTH: 52.00mm (2.05")
-WIDTH: 28.00mm (1.10")
-HEIGHT: 4.80mm (0.79")
-WEIGHT: 0.50 oz

PICATINNY RAIL MOUNT:
-LENGTH: 82.00mm (3.23")
-WIDTH: 21.16mm (0.83")
-HEIGHT: 20.00mm (0.79")
-WEIGHT: 0.90 oz

-TOTAL WEIGHT W/ PKG: 4.00 oz

WARNING:
-The below compatibility list is based on known SI test fitments as well as footprint data found online but do not guarantee 100% the full list is accurate
-Please note there is also other possible red dot brand and model fitments that can work
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

-C-MORE STANDARD: (+ additional C-MORE Standard footprint optics not listed here)

C-MORE SYSTEMS: STS (V1) Screw: x2 M3x10mm Rounded Mounting Post: x2 Small
SIG SAUER: ROMEO3MAX/3XL Screw: x2 M3x10mm Rounded Mounting Post: x2 Small
VORTEX OPTICS: RAZOR RED DOT Screw: x2 M3x11mm Rounded Mounting Post: x2 Small

-DELTAPOINT PRO STANDARD: (+ additional DeltaPoint Pro Standard footprint optics not listed here)

EOTECH: EFLX MINI REFLEX SIGHT (MRS) Screw: x2 M3x8mm Rounded Mounting Post: x2 Large
LEUPOLD: DELTAPOINT PRO Screw: x2 M3x15mm Flat Mounting Post: x2 Large
SIG SAUER: ROMEO2 Screw: x2 M3x14mm Flat Mounting Post: x2 Large

-DOCTER/NOBLEX STANDARD: (+ additional Docter/Noblex Standard footprint optics not listed here)

ATIBAL OPTICS: MRD V2/V3 RED DOT SIGHT Screw: x2 M3x8mm Rounded *Mounting Post: x4 Small
(*MRD V3 housing mount post holes are taller than small SI mounting posts provided)
BURRIS OPTICS: FASTFIRE™ 2 Screw: x2 M3x8mm Flat Mounting Post: x4 Small
CRIMSON TRACE: CT RAD™ PRO Screw: x2 M3x8mm Flat Mounting Post: x4 Small
PRIMARY ARMS: SLX RS-10 Screw: x2 M3x10mm Flat Mounting Post: x3 Small
VORTEX OPTICS: VIPER RED DOT Screw: x2 M3x8mm Flat Mounting Post: x4 Small
VORTEX OPTICS: VENOM RED DOT Screw: x2 M3x7mm Rounded Mounting Post: x4 Small

-RMR STANDARD: (+ additional RMR Standard footprint optics not listed here)

ATIBAL OPTICS: CRD RED DOT SIGHT Screw: x2 M3x8mm Flat Mounting Post: x2 Large
HOLOSUN: 407C/507C/508T Screw: x2 M3x8mm Flat Mounting Post: x2 Large
HOLOSUN: 509T

*Screw: x2 M3x6mm Flat
(*use RMR adapter plate provided by Holosun)

Mounting Post: x2 Large
SWAMPFOX OPTICS: JUSTICE/LIBERTY KINGSLAYER Screw: x2 M3x10mm Flat Mounting Post: x2 Large
SWAMPFOX OPTICS: KRAKEN

*Screw: x2 M3x6mm Flat
(*use RMR adapter plate provided by Swampfox)

Mounting Post: x2 Large
TRIJICON: RMR/SRO Screw: x2 M3x10mm Flat Mounting Post: x2 Large

-SHIELD STANDARD: (+ additional Shield Standard footprint optics not listed here)

HOLOSUN: 407K/507K

Screw: x2 M3x8mm Flat

Mounting Post: x2 Shallow

HOLOSUN: EPS CARRY MRS

Screw: x2 M3x8mm Flat Mounting Post: Not Compatible
SHIELD SIGHTS: AMS/RMS/RMS2/RMSC/ RMSX/SIS/SMS/SMS2/SMSC Screw: x2 M3x8mm Rounded Mounting Post: x2 Large

SIG SAUER: ROMEOZERO

Screw: x2 M3x8mm Flat Mounting Post: x2 Large
SWAMPFOX OPTICS: SENTINEL Screw: x2 M3x8mm Rounded *Mounting Post: x2 Large
(*mounting posts only using rear housing mount post holes)

VORTEX OPTICS: DEFENDER-CCW RED DOT

Screw: x2 M3x8mm Flat Mounting Post: x2 Large